Special Offer

Gtechniq G1 ClearVision Smart Glass

£10.99£9.89 *Gtechniq Special Introductory Offer - Save 10%*

Hydrophobic, Durable chemical bond, Last up to 20,000 miles.

Size 15ml

12 in stock

Description

 

Gtechniq G1 ClearVision Smart Glass

 

QUICK OVERVIEW

  • Hydrophobic
  • Durable chemical bond
  • Last up to 20,000 miles

 

Why use Gtechniq G1 ClearVision Smart Glass?

 

Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability.

G1 ClearVision Smart Glass is extremely durable, the hydrophobic function improves wet weather visibility helping to improve safety and eye strain. It also makes removing contaminants from the glass such as ice, bugs and tree sap much easier.

G1 will only work on glass substrates and so, it will not work on modern headlight lenses which are made from polycarbonate.  For these you will need to use G5 Water Repellent for Glass and Perspex.

Choose the 15ml bottle for windscreens only, but the 100ml bottle if looking to use on all of your car’s glass.

G1 is supplied with G2 Residue Remover.

Application instructions:-

 

 

Storage and Use:

  • Make sure you are working in a well ventilated area, in a temperature that is 5°c or above
  • Wear gloves and do not apply in direct sunlight
  • Clean all glass you are going to protect with G6 Perfect Glass and an MF5 Power Glass Cloth
  • For best results machine polish the glass with G4 Nano Glass Polish and a medium pad. Or alternatively, polish the glass with G4 Nano Glass Polish and a hand polishing pad. Apply a small amount and polish in a circular motion
  • Once finished, clean the glass back to a shine with G6 Perfect Glass and an MF5 or MF1 ZeroR Microfibre Buff Cloth – repeat this as many times as needed to remove all residue
  • Shake bottle well before use
  • For windscreens we recommend using 3 layers of G1, but for side and rear screens only 1 layer is needed
  • Apply a liberal amount of G1 to an AP1 Lint-Free Applicator Pad
  • Work product into the glass in a circular motion covering all of the glass, and leave to cure for 5 minutes
  • Using a new AP1 apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure
  • Apply your third layer with the same amount of product on an AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes
  • Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth
  • Finish by cleaning the wiper blades and glass with G6 Perfect Glass and an MF5
  • We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced
  • Do not expose your car to the elements for at least 3 hours
  • Store in a cool, dry place
  • Use G1 and G2 within 3 months of opening
  • There may be some wiper blade judder, in 90% of cases this will disappear within two weeks. Please take a look at our FAQ section if this problem persists

 

MSDS:-
  • Take a look at the Material Safety Data Sheet for G1 – MSDS

Brand

Gtechniq

Gtechniq’s Roots

Gtechniq Logo 01Gtechniq was founded by quantum physicist Drew Gill in 2001, out of a total dissatisfaction with the performance of paint protection products at the time. Everything from waxes, to new-fangled polymers and PTFE based miracle treatments, nothing on the market offered any meaningful durability, either in looks, or protection. Worse still, he found that most of the products actually performed poorer than the paints they were supposed to protect. From this discontent came a simple idea, ‘To engineer the world’s most beautiful, perfectly finished, smartest and most intelligent surfaces. Surfaces that do much more than simply look great when new.’ Drew’s background meant that he had a good understanding of how the forces, shapes and structures of a surface works on very small scales. He also knew what modifications may be possible in order to add some really useful enhancements. Improvements such as dirt repellency, ease of washing, scratch, UV and stain resistance, along with, long-term gloss and colour stability. So, after surveying many avenues of material science, in particular nano-scale surface engineering, lots of hard work and many thousands of failures, Gtechniq, Smart Surface Science was born. The first product in the Gtechniq range to be produced was C1 Crystal Lacquer, closely followed by P1 Nano Composite Polish. In 2006, Rob Earle became managing director of Gtechniq Ltd, taking over the reins from Drew. Rob’s passion for cars, boats and detailing in his spare time, gave him the enthusiasm to develop Gtechniq, testing new boundaries. He innovated and developed the products Drew had created, plus a whole lot more besides. Rob worked hard using forums such as Detailing World to develop Gtechniq’s reputation. Sending products to detailers and car care enthusiasts for testing and review, and letting the products speak for themselves. After opening a Detailing Centre in Kings Langley, which proved extremely successful, demand grew for Gtechniq. And the first Gtechniq website was launched selling products mail order across the globe. At the start of 2012 the conscious decision was made to close the detailing side of the business and to concentrate solely on product development and manufacturing. In order to do this, the business moved to new premises in Towcester, Northamptonshire. After nine months, a fire caused a major setback to Gtechniq, burning the new building and its contents to the ground. This did not deter Rob and his team of dedicated staff who work hard to rebuild the business – manufacturing more products and using a friend’s barn to store and package products for distribution. Following the fire, the business moved to a new home on the Pury Hill Business Park, Towcester, and continued to flourish. Over the last 10 years, Gtechniq’s products have been continually improved to provide a range that outshines and outlasts the competition. Rob has built a fresh, innovative brand, different to any other available on the market. Gtechniq’s line of surface preparation and finishing products are designed to perfect, protect and maintain all automotive, marine and aviation exteriors and interiors in a way no traditional products can match. To date, the Gtechniq range includes composite ceramic coatings, leather protection, fabric protection, wheel and trim protection, shampoos and much more.

Additional information

Weight 0.1 kg
0