Auto Finesse Iron Out Contaminant Remover
Auto Finesse Iron Out intensive iron-contaminate and fallout remover. This safely and effectively removes the tiny pieces of ferrous shrapnel that can embed itself into practically any surface. It targets and dissolves these iron particles before significant damage to your vehicle can occur.
Ours is an advanced, pH neutral, reactive gel formula that specifically targets only iron-based contamination. It is suitable to use on all exterior surfaces. These include paintwork, aluminium, magnesium, stainless steel, anodised finishes, chrome, glass, plastic, and even rubber. It also contains strong degreasing agents to help loosen road films. Which makes it a powerful force in the decontamination process.
Removes Brake Dust and Iron Particles from your Vehicle
Advanced pH Neutral Formula
Suitable for Paintwork, Aluminium, Anodised Wheels & Glass
Prevents Paint Corrosion with Regular Use!
Contains Degreasing Agents to Remove Road Grime
Auto Finesse Iron Out should be used as part of a multi-stage decontamination process, in between tar removal and claying. This process should be performed at least twice a year, before winter and after! On daily-driven vehicles before applying a car wax or paint sealant, or before any polishing work is performed. If you are unsure of whether or not your car has ferrous contamination, spray the product directly onto a yellow Foam Pad, and wipe the product on a small section of your vehicle’s paint or wheels. We can almost guarantee that you will immediately witness a chemical reaction. Alerting you that you have iron fallout that needs to be removed. This reaction is often referred to as ‘Bleeding’, as the solution turns blood red where it contacts iron fallout. This temporarily highlights the contamination while it is dissolved.
How To Use:-
1: Apply liberally to the surface.
2: Wait for the reaction to turn any contamination purple.
3: Rinse thoroughly with water.
4: Repeat if necessary.
Do not use in direct sunlight, or in temperatures below 32-degrees Fahrenheit / 0-degrees Celsius.
Do not allow the product to dry onto the surface, as staining may occur. Rinse off, or apply more product if necessary, to maintain a wet film.
Always use this product in a well-ventilated environment.