Dressle All Purpose Trim Dressing
The Auto Finesse Dressle is a versatile all-purpose dressing for the exterior and interior trim. This liquid, dry touch water based dressing can be sprayed directly on to the surface. Or applied via an applicator or cloth depending on the area of the vehicle you are working on, and your personal preference. This highly versatile dressing is also great for dressing hard to reach areas such as wheel wells and engine bays. Due to its spray on and walk away nature, simply dose the surface with a few fine mists of Dressle and leave to cure.
Dressle is also a great product to enhance the appearance of the cockpit of your vehicle. As it dries to a non-sticky or greasy finish, it leaves a pleasant and natural sheen. The UV inhibitors help prevent interior surfaces from fading, and keeps a deep rich finish to your interior plastic and vinyl trim. It contains no waxes, oils, or petroleum distillates.
Why Use Dressle?
Water Based – Contains No Waxes, Oils Or Petroleum Distillates
UV Inhibitors to Protect Interior Plastics from Fading
Suitable for Interior, Exterior and Engine Bay Trimmings
Apply Via an Applicator or Cloth to suit your personal preference
For engine bays:
Clean and dry your engine bay first, then liberally spray Dressle on all of the engines plastic components, you can also coat the painted and metal parts too. Then leave to dry for 4-6 hours. Wipe up any excess after this curing time and that’s it! Your bay will be looking fresh, clean and protected. The same approach is to be taken for wheel wells also.
For Interior plastic, vinyl and rubber:
Apply 1-3 spritz of product to a Microfibre applicator and wipe on to the surface, door cards dash boards and other such flat surfaces can be coated easily this way.
For Exterior trim:
Apply 2-3 spritz of Dressle to a microfibre work towel, and work in to the surface, then leave to cure. If patching occurs add a subsequent second coat.
How To Use
1: Apply 1-2 spritz to a microfibre towel and spread to form an even film on the surface.
2: Alternatively for intricate grills, engine bays, or wheel wells apply by liberally spraying directly on to the surface, leave for 1-5min before wiping away excess with a clean microfibre towel.
3: For added sheen, apply multiple coats to achieve desired finish.